Lead Beneficiary

Dimensions



Maximum authorised dimensions

Maximum height
Height 4.00 metres
Maximum width
Motor vehicles and vehicle combinations (trucks with ordinary trailers/semi-trailers) 2.55 metres
Superstructures of refrigerator vehicles 2.60 metres
Maximum length
Motor vehicle 12.00 metres
Truck with ordinary trailer 18.75 metres
Truck with semi-trailer 16.50 metres
Trailer 12.00 metres
Additional requirements
  1. Any motor vehicle or vehicle combination which is in motion must be able to turn within a swept circle having an outer radius of 12.50 metres and an inner radius of 5.30 metres.
  2. Maximum authorised distance between the axis of the fifth-wheel king pin and the rear of the semi-trailer (A1) = 12.00 metres.
  3. The distance measured horizontally between the axis of the fifth-wheel king pin and any point at the front of the semi-trailer (B1) must not exceed 2.04 metres.
  4. Maximum distance measured parallel to the longitudinal axis of the truck-trailer combination from the foremost external point of the loading area behind the cabin to the rearmost external point of the trailer of the vehicle combination (A2) = 16.40 metres.
  5. Maximum distance measured parallel to the longitudinal axis of the truck-trailer combination from the foremost external point of the loading area behind the cabin to the rearmost external point of the trailer of the vehicle combination (A2) minus the distance between the rear of the drawing vehicle and the front of the trailer (B2) = A2 – B2 = 15.65 metres.
  6. The distance between the rear axle of a motor vehicle and the front axle of a trailer (C2) must not be less than 3.00 metres.


source: transportxxl.eu

 Project Partners

       

Federal Association of SME's, Rostock

NPPE Klaipeda Shipping Research centre


                   

 

Project Partner Intranet

Login:     Password:


© 2009 All rights reserved.
Solution: Adme
Content management system easywebmanager